Industrial floor coatings
| 
Floorings (floors) are one of the important elements of industrial enterprises, because they must have high strength to thermal, chemical and mechanical stresses. Flooring systems offered by company LLC “Antikor Prom Service” solve these problems thanks to wide application field in different industries, starting from turbine chambers to pharmaceutical plants. Industrial flooring systems, produced by KCH-Steuler, protect of acid, alkaline and other reactions of various chemical substances, allow carry out steam cleaning, resistant to mechanical loads.
Our floor coatings occupy the leading position in industrial sector. Places for material processing, raw materials and production storage must be resistant to mechanical (vibration, transportation, loading-unloading works), thermal and chemical influences.
- Monolithic
- Based on polymers
- Hybrid novolak
- Epoxy resin
- Epoxy phenol
- Epoxy novolak
- Polyether
- Vinyl ether
- Vinyl ether novolak
- Conductive
The most widely used floor coatings are KCH KERACID®, KERAPLAN® or KERAKRET® based on epoxy resin (EP), unsaturated polymer resin (UP), polyether resin (VE).
Floor coating systems from KCH-Steuler are successfully used in many industrial enterprises.
| System | Bond. method |
Thickness mm |
Description | Properties |
| KERANOL® EP 122 | EP | 2 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers | Excellent resistance to cracking and many chemicals. |
| KERANOL® EP 1102 | EP | 1,5 | Seamless coating, that spreads by itself , based on epoxy resin with mineral fillers | Excellent resistance to cracking and many chemicals Application: coating in warehouses, stores, production areas, were water-contaminating substances are stored. |
| KERAPLAN® EP 110 | EP | 3 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers | Coating for floors with intensive movements, resistant to mechanical loads and many chemicals. The coating is hard, without residuals and may be applied without seams. |
| KERAPLAN® EP 123 | EP | 1-2 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers | Electrostatic coating floors with intensive movements, resistant to mechanical loads and many chemicals |
| KERAPLAN® EP 124 | EP | 1,6-1,8 | Two-componential electro conductive of epoxy resin | Coating for floors with intensive movements, resistant to mechanical loads and many chemicals. The coating is hardened without residuals and may be applied without seams |
| KERAPLAN® EP 230 | EP | 3-5 | Seamless synthetic coating based on epoxy resin with mineral fillings, applied with trowel | Coating for floors with intensive movements, resistant to critical mechanical loads and wide range of chemicals, such as aggressive alkalis and salt brine |
| KERAPLAN® EP 430 | EP | 1 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers | Seamless non-slip coating, applied in places of intensive movement. It is mainly used as coating material for floors in warehouses and workshops, rooms of maintenance service and other surfaces, exposed to moderate mechanical and chemical stresses. |
| KERAPLAN® EP 631 | EP | 3-6 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers | Seamless non-slip coating, resistant to critical mechanical loads and wide range of chemicals |
| KERAPLAN® EP 640 | EP | 2 | Seamless coating, that spreads by itself, based on epoxy resin with mineral fillers and electro conductive additives | Seamless non-slip coating, resistant to of chemicals. The coating hardens without residual |
| KERAPLAN® EW110 | EP | 0,2-0,3 | Seamless coating, that spreads by itself , based on epoxy resin with mineral fillers | Coating for floors, with medium chemical resistance that is applied to places with intensive movements and mechanical loads |
| KERAPLAN® EW120 | EP | 0,2-0,3 | Electro discharging, that spreads by itself, synthetic coating for concrete surfaces protection | Coating for floors, with medium chemical resistance that is applied to places with intensive movements and mechanical loads |
| KERAPLAN® PU 410 | PUR | 0,1 | Matt lacquer of synthetic resin, epoxy resin and polyurethane coatings | Insensibility to dirt, easy cleaning, coating paint with excellent chemical resistance |
| KERAPLAN® PU 411 | PUR | 0,1 | Colorless, matt, aqueous acrylic polyurethane sealing system | Matt, colorless sealing system for ЕР and polyurethane coatings , that has from low to medium resistance to chemical and mechanical loads |
| KERAPLAN® VE 113 | VE | 1-2 | Two componential system for floor coating of vinyl ether resin, that is exposed to critical chemical influence | Coating for floors with vehicular traffic, resistant to mechanical load and range of chemicals. |
| KERAPLAN® VE 121 | VE | 1 | Antistatic top coat, that spreads out, for concrete surfaces, exposed to strong chemical influence | Paint for surfaces with intensive movement, has excellent resistance to acids, alkaline solutions, oxidizing substances and solutions. It is practically suitable for usage in all places, that are exposed to temporal influence of liquids of Vb- categories, AI, AII and B (solutions, spirits, hydrocarbonates, cetones or esters), takes off electrostatic stress |
| KERAPLAN® VE 122 | VE | 1 | Self-leveling, top cot with antistatic property for floors exposed to strong chemical influence. | Paint for surfaces with vehicular traffic, has excellent resistance to acids, alkaline solutions that oxidize with substances and solutions. |
| KERAPLAN® VE 211 | VE | 3 | Wear resistant paint, applied with trowel for surfaces based on vinyl ether resin | Paint for surfaces with intensive movement, resistant to mechanical loads. It also has excellent resistance to acids, alkaline solutions, oxidizing substances and solutions |
| KERAPLAN® VE 540 | VE | 3 | Antistatic non-slip coating based on synthetic resin for floors, exposed to strong chemical and mechanical influences. |
When used in chemical, power, pharmaceutical, steel industry in production facilities, in laboratories and sterile rooms, concrete is exposed to critical stress. We offer You floor coating materials with excellent characteristics:
- High compression strength (tile surfaces)
- Excellent tensile strength in the deflection of all floor coating
- Very high resistance to loads
- Very smooth surface
- Resistance to strong local influences
- Resistance to thermal influence
- System of construction on the foundation
- Reducing the quantity of layers due to monolithic laying process
- Easy cleaning and minimal maintenance costs
Floor coating systems of Steuler-KCH are successfully applied in many industrial enterprises.
